ASUS NCCH-DR Driver
Processor: Dual Intel® Xeon™ with FSB - Chipset: Intel®EMCH / Intel®ESB - Memory: Dual Channel PC, ECC Un-buffered, Maximum up to. Quick quote for ASUS NCCH-DR/IDE. ASUS NCCH-DR/IDE CPU Board - ASUS Motherboard NCCH-DR IDE Dual Xeon D-DDR FSB GBLAN RAID. Version /01/ KBytes. NCCH-DR MB Released BIOS (Please use awdflash v to flash the BIOS) Update CPU micro code.
|Supported systems:||Windows Vista, Windows Vista 64-bit, Windows XP 64-bit, Mac OS X, Mac OS X 10.4, Mac OS X 10.5|
|Price:||Free* [*Free Regsitration Required]|
ASUS NCCH-DR Driver
You can also use these springs to support the weight of the CPU heatsinks. Take note of the four CEK spring hooks located beside the screw holes. ASUS NCCH-DR
Locate the CPU heatsink holes on the motherboard. Press the upper spring hooks inward, then ASUS NCCH-DR to the upper CPU heatsink holes until they snap in place.
NCCH-DR/IDE - ASUS
Press the lower spring hooks inward, then insert to the lower CPU heatsink holes until they ASUS NCCH-DR in place. Repeat the process to ASUS NCCH-DR the second spring to the CPU2 heatsink holes.
The support plates appear as shown when installed. Heatsink ASUS NCCH-DR matched to the hole on the CEK spring 7.
NCCH-DR Manual Servers & Workstations ASUS USA
Hardware information 29 2. Hardware information 31 2. Hardware information 33 2.
Locate the CPU sockets ASUS NCCH-DR the motherboard. Flip up the socket lever and push it all the way to the other side.
Asus NCCH-DR ATI Rage-XL Dual Xeon Extended ATX Motherboard
Make sure that the socket lever is pushed back all the way, otherwise the CPU does not fit in ASUS NCCH-DR. Position the CPU above the socket as shown.
Carefully insert the CPU into the socket until it fits in place. The CPU fits only in one correct orientation. Marked corner gold arrow 5.
Carefully push ASUS NCCH-DR the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked. Apply the thermal interface material thermal grease to the top of the CPU.
Other Computer Components & Parts eBay
This thermal grease should come with the CPU package. Repeat steps 1 to 6 if you ASUS NCCH-DR to install a second CPU Chapter 2: Hardware information 35 2.
Visit the ASUS website for an updated list of qualified heatsinks tested for use on this motherboard. Make sure that you have applied the thermal grease to the ASUS NCCH-DR of the CPU before installing the heatsink.
To ASUS NCCH-DR the CPU heatsink and fan: Place the heatsink on top of the installed CPU, making sure that the four screws ASUS NCCH-DR the heatsink align with the nuts on the support plate or with the holes of the CEK spring. Use a Phillips screwdriver to tighten the four heatsink screws in a diagonal sequence.
Repeat the process to install the second heatsink on top of the second CPU, if ASUS NCCH-DR. Use any of the recommended configurations in Table 1. For ASUS NCCH-DR compatibility, it is recommended that you obtain memory modules from the same vendor. Due to chipset resource allocation, the system may detect less than 4 GB ASUS NCCH-DR memory when you installed four 1 GB DDR memory modules. Hardware information 37 Table 1: Failure to do so can cause severe damage to both the motherboard and the components.